基于倾斜摄影测量的大比例尺三维测图技术     

李通 《北京测绘》2020,(4):543-546

目前,城市大比例尺地形图更新主要采用全野外的测量方法,不仅耗费大量的劳动力,并且效率低下。旋翼机和倾斜摄影测量技术的快速发展,为城市大比例尺地形图的测绘与更新提供了全新的技术手段。本文以滕州市城区约10 km2的1∶500地形图测绘项目为例,采用大疆精灵4 Pro旋翼机进行数据获取,Smart 3D软件进行空三加密及三维建模,最后在EPS软件中进行三维测图,并对地形图成果进行了精度检核,验证了技术方案的可行性,为同类项目提供了有益参考。  相似文献   

高分三号SAR影像双阈值变化检测   总被引：1，自引：1，他引：0  

崔斌  张永红  闫利  魏钜杰 《遥感学报》2020,24(1):1-10

双阈值合成孔径雷达SAR(Synthetic Aperture Radar)变化检测算法具有在发现变化区域的同时还能确定地表发生后向散射变化类型的优点。针对广义高斯双阈值最小误差法D-GKIT(Dual Generalized Kittler and Illingworth Thresholding)在进行阈值选取时直方图中不同类别像素灰度级重叠严重时,分割结果容易在尖峰单侧选取出双阈值而导致无法正确分割差异图的问题,本文提出一种结合归一化最大类间方差和广义高斯最小误差法GKIT(Generalized Kittler and Illingworth Thresholding)的双阈值SAR变化检测方法。首先,提出以归一化最大类间方差值作为灰度级重叠程度的判别参数,确定阈值的选取顺序及两个候选区间;然后,利用GKIT在候选区间内进行分割,获取单侧阈值及非变化类拟合函数;最后,提出利用非变化类拟合函数更新后的直方图作为另一侧阈值选取基础进行分割,得到对应分割阈值。以宁波地区高分三号(GF-3)SAR卫星影像作为试验研究数据,结果表明:本文方法能较好地解决灰度级重叠时D-GKIT无法进行正确分割的问题,具有良好的变化检测效果和更强的鲁棒性且达到了利用研究区数据验证利用GF-3号SAR卫星影像进行变化检测研究可行性的目的。  相似文献   

资源三号卫星影像纠正的方法研究     

王檄  许根  张长河 《测绘与空间地理信息》2020,(1):118-121

影像的应用前提是影像处理,大气校正可消除大气和光照等因素对地物发射的影响。在此基础上,介绍几种常用的几何纠正方法,可消除系统和非系统因素引起的影像几何变形。本文通过对资源三号卫星的基本参数信息和相对应影像数据特点的介绍,先通过大气校正,校正后的影像分别使用几何纠正的几种方法,并通过各种方法的计算量、实用性以及相应的精度,对比分析各种方法在处理这种数据时的优越性。  相似文献   

基于二三维一体化的智慧警务地理信息平台建设与研究     

张庆全  袁晓宏  余迎 《测绘与空间地理信息》2020,(2):150-152

"智慧警务"是"智慧城市"的重要组成部分,也是社会治安防控体系发展的必然趋势,应提高认识,积极探索和论证建设"智慧警务"的模式和方法。本文阐述了基于二三维一体化的智慧警务地理信息平台建设内容和总体框架,并详细地介绍了警用地理信息系统及智慧警务应用系统建设内容和技术路线。  相似文献   

沿107.6°E南北向剖面鄂尔多斯地块及周缘地区地壳结构          下载免费PDF全文

陈洁  陈永顺  郭震  杨挺 《地球物理学报》2020,63(7):2592-2604

鄂尔多斯地块紧邻青藏高原东北缘,位于华北克拉通的西部,在我国中生代、新生代以来东部地区的构造活动中起到了重要作用.对鄂尔多斯及其周缘地区的研究可以提供有关华北克拉通的形成、演化和破坏过程的重要信息.本文选取了纵贯鄂尔多斯的107.6°E附近南北剖面上的44个流动地震台站进行分析,采用接收函数方法,进行Kirchhoff偏移成像,并且结合在该区域内前人的地震面波频散进行联合反演,获得剖面下方的地壳内部精细结构.研究结果显示:(1)莫霍面在鄂尔多斯北部较平缓,约45km深;在鄂尔多斯南部有所加深,达到50km;其北边的河套盆地的地壳厚度约为50km;南边的渭河盆地到秦岭地区及四川盆地的地壳厚度从约为40km增厚到47～50km.(2)河套盆地下方存在大规模的低速异常,最深可达25km,反映了其显著的拉张构造和沉积历史.(3)秦岭造山带下方的低速异常对应于其主要为长英质的地壳组分,可能是由于中生代的拆沉作用导致的地壳下部基性岩石层的缺失.(4)以38°N为界的鄂尔多斯地块,南北部地壳速度结构存在差异,可能表明了这两部分经历的构造历史不同.  相似文献   

Improving integrity of RC beam-column joints with deficient beam rebar anchorage     

Syafri Wardi  Yasushi Sanada  Nandita Saha  Susumu Takahashi 《地震工程与结构动力学》2020,49(3):234-260

In recent earthquakes in developing countries, severe damage was observed on reinforced concrete buildings. This study focuses on exterior beam-column joints with substandard beam rebar anchorage and seismic strengthening by installing wing walls. First, a series of experiments was conducted to investigate the seismic behavior of exterior joints with substandard beam rebar anchorage representing typical Bangladeshi buildings. Two 0.7-scaled exterior joint specimens were tested, and these specimens showed beam rebar anchorage failure and/or joint shear failure. Prior to strengthening of the joint, a series of pullout tests was conducted on postinstalled bonded anchors in low-strength concrete for strengthening design. Then, an experiment was performed to apply the strengthening method by wing walls to one of the exterior joint specimens to improve the integrity, and this method was intended to prevent the failure of beam rebar anchorage. The strengthening method is proposed to extend the development length of beam longitudinal bars by considering the embedment length along the wing walls. The test results verified the effectiveness and applicability of the proposed strengthening method to upgrade exterior RC beam-column joints with deficient beam rebar anchorage.  相似文献   

BDS-3多频点伪距单点定位性能研究     

张乾坤  刘小生  何琦敏 《测绘通报》2020,(1):71-75

针对目前有关北斗三号系统伪距单点定位研究较少，未对三号系统多个频点的定位性能进行对比分析的现状，本文利用实测数据对三号系统多个频点的定位性能进行了研究，并联合BDS-2、Galileo进行了同频伪距单点定位试验，统计分析了组合定位多个频点的同频定位结果。试验结果表明：目前三号系统单独定位能力有限，不适合单独定位；BDS-3/Galileo同频组合定位可以弥补BDS-3新频点单频定位时卫星个数不足、数据不完整导致的定位精度过差的情况，同时能够提高Galileo的定位精度；BDS-2/3的B3I频点与BDS/Galileo组合的B2b频点的定位精度均与GPS的L1频点的定位精度相当。  相似文献   

城市场景结构感知的网格模型简化算法     

张春森  张会  郭丙轩  彭哲 《测绘学报》2020,49(3):334-342

针对二次误差测度(QEM)网格简化算法全局几何特征信息损失严重的缺点,提出一种具有结构感知功能面向城市三维模型重建的网格简化算法。该算法顾及城市影像中平面结构特征,以代理平面为全局特征约束条件,使模型在简化过程中全局结构特征更多地被保持,以利于多层次细节模型(LOD技术)、网格优化提速等模型后续操作。以倾斜摄影获取影像生成的初始三角网格模型为试验数据,采用所给算法对其进行网格简化并与QEM算法进行对比。结果表明:所给算法简化精度及简化效率均优于QEM算法。  相似文献   

BDS-2/BDS-3伪距单点定位精度分析          下载免费PDF全文

方欣颀  范磊 《全球定位系统》2020,45(1):19-25

北斗三号(BDS-3)基本系统于2018年底开始提供全球服务．通过处理37个全球GNSS服务组织(IGS)多模实验跟踪网(MGEX)观测站90天北斗数据,评估了北斗二号(BDS-2)和BDS-3在全球范围内的可见卫星数、几何精度衰减因子(GDOP)和单频伪距单点定位精度,分析了BDS-2／BDS-3组合对BDS-2、BDS-3单系统空间几何构型、伪距单点定位(SPP)精度的改善程度．结果表明,BDS-3的空间几何构型较BDS-2有明显的提升,定位精度在东方向、北方向和高程方向分别为1.490、2.610、5.238 m(RMS),相较于BDS-2分别提高了58％、1％、24％．BDS-2／BDS-3组合在东方向、北方向和高程方向分别为1.45、2.36、4.90 m(RMS),较BDS-2与BDS-3单系统分别提高了59％、11％、29％,以及3％、10％、6％．并且BDS-2／BDS-3组合明显削弱了BDS-2定位精度与地理经度相关的边缘效应.   相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献